MX Layers, Commands & Types

2 layers, 6 commands, 41 types.

Each button has 2 layers.

Each layer has up to 6 commands.

Each command can choose out of 41 types.

2 Layers

Each Button has 2 layers: Normal Press and Press-And-Hold. This doubles your amount of buttons!

4 Different Press-And-Hold types: Block, Once, Trigger-Only and Hold.

Normal Press

When using Easy Mode, only Normal Press is visible.

Press-And-Hold - Block

Press-and-hold does not work. Buttons will respond faster because commands will be processed on button press and not on button release.

Press-And-Hold - Once

Activates the button on the 2nd layer once and will return back to the 1st layer page on the next press.

Press-And-Hold - Trigger-Only

Activates the button on the 2nd layer but stays on the 1st layer.

Press-And-Hold - Hold

Activates the button on the 2nd layer and stays there.

Voes MX-18

Voes MX-18

6 Commands

Each Layer has up to 6 commands.

When using Easy Mode, only 1 command is visible.

Default behavior

Commands are transmitted all at once.

Step By Step

Alternatively commands can be transmitted Step-By-Step. Only one command will be transmitted on each step. On the next button press, the next command will be transmitted. And so on...

At the end, the first command will be transmitted again. And so on...

If Auto Color Steps is enabled, the LED will change on each step.

Voes MX-18

41 Types

Each command can choose out of 41 Types.

10 dedicated Axe-Fx II and III™ Types.

8 dedicated Kemper Profiler™ Types.

3 dedicated Line 6 HX Stomp™ Types.

1. None

None does nothing! If steps is active, this command will be skipped.

2. Preset (PC)

Preset (PC) also known as Program Change transmits a program change PC on a midi channel Ch (1-16).

3/4. CC On/Off & CC Off/On

ON sends a control change CC (1-127) on Ch (1-16) with Value 127 (maximum). OFF sends exactly the same CC with Value 0 (minimum).

5/6. CC On Only & CC Off Only

CC On Only always sends Value 127 on each press on CC (1-127) on Ch (1-16). This command is ideal for Tap-tempo. The corresponding LED will blink briefly.

CC Off Only is the opposite.

7. CC Custom

Use this if you need a value different than minimum (0) or maximum (127).

8/9. Expr 1 CC Swap & Expr 2 CC Swap

A nice feature to change your Exp. Input 1/2, e.g. from Wah to Volume.

10/11. Auto 1 On CC Swap & Auto 2 On CC Swap

Replaces the CC and Ch of the regular Expr 1/2 Auto On settings.

12. Button On/Off

Turns another Button On or Off.

13. All Other LEDs Off

In some cases, there might be a conflict with the visual LEDs on/off layout and the actual on/off state of the connected musical instrument. Using the All Other LEDs Off command can solve this problem.

14. Change Color

Change the Color of the Button to one of the 6 possibilities: Red, Green, Blue, Yellow, Purple or Turquoise. Useful when using steps.

15/16. Bank Down & Bank Up

Bank Down/Up selects the first preset number and decreases/increases it with the count of all the presets on the layout.

17/18. Preset Down & Preset Up

Decreases/increases the current preset number.

19. Scene/Snapshot

Select Scene 1-8 (Axe-Fx II™) or Snapshot 1-3 (HX Stomp™).

20/21. Scene/Snapshot Down & Up

Decreases/increases the current Scene (Axe-Fx II™) or Snapshot (HX Stomp™).

22. Preset Select

When clicking on a Preset Select button, all LEDs will blink blue and all buttons are connected to their respective Preset number. E.g. clicking on button 4 will bring you to preset 4. After selection, buttons will go back to their programmed state.

23. Bank Select

When clicking on a Bank Select button, all LEDs will blink red and all buttons are connected to their respective Bank number. E.g. clicking on button 3 will bring you to bank 3. After selection, buttons will go back to their programmed state.

24. Save

This will save the on/off LED states of all the buttons for the current preset.

25-26. AFX2-Preset, AFX2–Tuner

Special commands to sync with the Axe-Fx II, XL & XL+™.

MX will show Preset Name and Tuner info on the LCD.

27-33. AFX3–Preset, AFX3–Scene, AFX3–FX Block, AFX3–Channel, AFX3–Looper, AFX3–Tuner and AFX3–Tempo

Special commands to sync with the Axe-Fx III™.

MX will show Preset Name, Scene Name, Block On/Off state and Tuner info on the LCD.

34-41. KMPR-Performance, KMPR-Rig, KMPR-Stomp&FX, KMPR-Rotary Speed, KMPR-Delay Feedback, KMPR-Dly Hold, KMPR–Tuner and KMPR–Tempo

Special commands to sync with the Kemper Profiler™.

MX will show Performance Name, Rig Name, Stomp&Fx On/Off state and Tuner info on the LCD.

Voes MX-18

Voes MX-18

Try it

Download the Editor (Windows only) and try it out yourself.

Download