Voodoolab - HEX

Enable MIDI Messages

You can select whether HEX responds to MIDI Program Change (PC), 
Control Change (CC), both message types, or none.

NOTE: When using Voodoo Lab Ground Control Pro, you must disable 
both PC and CC.

The default is both PC and CC are disabled.

1) Apply power while holding down button #1. The LEDs will flash 
until you release the button.

2) Press buttons #1 and #2 to select message types:


MIDI Message Type   LED #1  LED #2

None*                OFF     OFF
PC only              ON      OFF
CC only              OFF     ON
Both PC and CC       ON      ON

*None is the correct setting for Voodoo Lab Ground Control Pro 
only.

3) Remove power when finished.
Voodoolab - HEX 
Set MIDI Channel

The default MIDI channel is 1.

1) Apply power while holding down button #2. The LEDs will flash until you release the button.

2) Press buttons #1 through #4 to select the MIDI channel:


Channel   LED#1 LED#2 LED#3 LED#4

1          OFF    OFF   OFF    OFF
2          ON     OFF   OFF    OFF 
3          OFF    ON    OFF    OFF
4          ON     ON    OFF    OFF
5          OFF    OFF   ON     OFF
6          ON     OFF   ON     OFF
7          OFF    ON    ON     OFF
8          ON     ON    ON     OFF
9          OFF    OFF   OFF    ON
10         ON     OFF   OFF    ON
11         OFF    ON    OFF    ON
12         ON     ON    OFF    ON
13         OFF    OFF   ON     ON
14         ON     OFF   ON     ON
15         OFF    ON    ON     ON
16         ON     ON    ON     ON

3) Remove power when finished.


Select Control Change Numbers

Each MIDI Control Change (CC) message includes a controller number, which specifies which HEX loop to turn on or off. 
You can select from four different groups of CC numbers.

The default group is CC numbers 80-85, which means that 80 controls loop #1, 81 controls loop #2, 82 controls loop #3, 
and 83 controls loop #4, 84 controls loop #5, and 85 controls loop #6.

Here’s how you select which CC numbers HEX will respond to:

1) Apply power while holding down button #3. The LEDs will flash until you release the button.

2) Press buttons #1 through #4 to select the number group:


CC Group LED#1 LED#2 LED#3 LED#4

80-85      ON    OFF    OFF   OFF
88-93      OFF   ON     OFF   OFF
64-69      OFF   OFF    ON    OFF
56-61      OFF   OFF    OFF   ON

3) Remove power when finished.