MIDI Channel Setting
				
This amplifier can either automatically or manually 
change the 16 MIDI channels you would like it to 
respond to. The channel change is stored in memory 
& only needs to be done when you need the amp to 
respond on a certain channel.

1) In order to set the MIDI channel: With the power off, 
press & hold the Store button then turn on the power 
switch. The amp will power up & begin to flash 4 LEDs. 
Once this happens it is awaiting the channel data to be 
received from the external equipment (automatic) or to 
be set manually.

2) (Automatic, recommended) With your external equipment 
ready (pedals, computers, etc.) & set to the channel you 
want the amplifier to be controlled from via MIDI, send a
command to the amplifier by pressing a program change 
button or CC command on your external equipment. Once the 
amplifier receives the data, it will verify the channel it
received & save it to memory. Easy!

3) (Manual) Once step 1 has been completed above & the 
LEDs are flashing, press the channel push button. The 
channel LED will flash & the other LEDs will turn off, 
this signifies that MIDI channel 1 has been selected. 
Simply continue to press the channel push button to get 
to the channel you desire. As you press the switch you 
will notice the LEDs turn on as you increase the MIDI 
channel number. Once you reach the channel you desire, 
press the Store switch to save it to memory.