Changing the MIDI Channel
From the factory the Revelation is set to receive Midi messages on
Midi channel 1, however this can be changed upon powering up the
pedal.
After applying power to the Revelation, hold down the Preset switch
while the pedal is in startup mode (Mix & Decay knobs are white and
the Bypass and Preset LED's are flashing). While continuing to hold
down on the Preset switch, the Bypass LED will flash the number of
times equivalent to the Midi channel (set to 1 from the factory) and
then will have a 2 second pause before flashing again. Simply press
the Bypass switch to increment the Midi channel by 1, press as many
times necessary to change to the correct Midi number. The numbers
available on the Revelation are channels 1 thru 16, once you've
reached number 16 the next press will start over again at number 1.
Once you have the right number selected, just release the Preset
switch to save this setting into permanent memory.
Saving Presets Via MIDI
You have two options for creating presets. The first option is to use
a "smart" midi controller that can send multiple simultaneous midi
messages. Just send individual CC messages to turn the Bypass switch
on, select the algorithm, and set the values for each knob.
The second option is to use our revolutionary CC Snapshot feature.
While in Live Mode, select your desired algorithm and then set all
of the knobs to their desired positions. From there just send midi
CC #28 with any Value from 3 thru 124. The pedal will then take a
snapshot of its algorithm and knob positions, after that the knobs
will flash green letting you know the preset has been saved into
permanent memory. To recall this preset, just send a PC message with
the same number used for the Value when sending CC #28.
Example: send CC #28 Value 10 to save a preset in the 10th slot.
Send PC #10 to recall the new preset.
The JET Revelation can save 125 onboard presets (0 thru 124).
